Plumbing

Trusted Toilet Repairs in Greater Boston

G&C Plumbing & Heating

Need toilet repairs now? We fix leaks, clogs, running toilets, and replacements with clear options before any work begins. Our licensed techs respect your home, explain choices, and back every job with a 2-year warranty. Serving the Greater Boston region, including Boston, Worcester, and Providence. Rated 4.9 from 1,053 reviews. Call or book online today and we will take care of it fast.

Why Choose Us

  • Upfront, clear pricing

    Options reviewed and approved before work starts

  • Stronger warranties

    2-year warranty standard, 4 years for Priority Plan members

  • Proven reputation

    4.9 rating from 1,053 reviews

  • Accredited and licensed

    A+ BBB rating; Master Plumber, Gas Fitter, and more

  • Clean, respectful service

    Shoe covers and spotless cleanup at every visit

Pricing · Toilet Repairs

What you can expect to pay

Toilet Repairs jobs cost $175 to $1,500, depending on the work. Each job type is broken down below.

100%rate the price fair or betterMarket average 79%

Repair

$175 – $450
Below typical · area $99 – $1,900

Raises the price

3
  • Full internal rebuild vs flapper+$300 to $500
  • Wax ring and reset+$350 to $550
  • Supply line and shutoff valve+$450 to $650

Replace/Install

$700 – $1,500
Below typical · area $300 – $1,900

Raises the price

2
  • Floor repair after removal would require a general contractor as we do not make these repairs to the floor.+$1
  • Old toilet disposal is always included in our pricing+$1

Reviews

What Our Customers Say

Customers mention

  • quality1
  • speed1
  • professionalism1

Based on the reviews shown here.

  • Placed a call early and had assistance within an hour.
    Sam C.
  • They explained everything, cleaned up, and were very respectful.
    Natalie H.

FAQs

Frequently asked questions

Still have questions?

What should I do if my toilet is not flushing properly?

If your toilet won’t flush, try a few quick checks, then schedule service. Open the tank and untangle the handle chain, reseat the flapper, and confirm water is at the fill line. Use a plunger for light clogs. Do not use chemical drain cleaners. If the bowl rises, turn the shut-off valve clockwise to stop water. G&C can fix flappers, fill/flush valves, or replace the toilet, often same visit, with upfront pricing and a 2-year warranty (4 years for Priority Plan members).

Updated: 2025-12-29

Need help in Bellingham, MA? Call (508) 571-6488 or book online.

What is the most common cause of a running toilet leak?

Most running toilets are caused by a worn flapper that no longer seals. A close second is a misadjusted or failing fill valve. We stock both parts for same-visit fixes in Franklin and nearby towns. Priority Plan members receive a free dye-tab test to spot silent leaks.

Quick checks:

  • Add food color to the tank; color in bowl = flapper leak.
  • Set water level to the tank mark.
  • Ensure the flapper chain isn’t too tight or tangled.

Updated: 2025-12-29

Need help in Bellingham, MA? Call (508) 571-6488 or book online.

What causes a toilet to leak from the base when flushing?

A toilet leaking from the base when you flush usually means the seal between the toilet and floor has failed. It can also indicate a damaged or misaligned flange, or a cracked toilet component. We diagnose leaks at the base and complete on-the-spot repairs or, if needed, a replacement (a standard replacement in Franklin typically takes 2–3 hours). You get clear, upfront pricing and a 2-year warranty on our work (4 years for Priority Plan members).

Quick steps:

  • Turn off the shut-off valve.
  • Avoid chemical cleaners.
  • Limit use and call us.

Updated: 2025-12-29 00:00:00

Need help in Bellingham, MA? Call (508) 571-6488 or book online.

How much does it typically cost to replace a toilet?

We provide upfront, on‑site estimates for toilet replacement, and final cost depends on inspection. You’ll approve the price before we start.

What affects price:

  • Toilet you choose (standard, dual‑flush, pressure‑assist, wall‑mount).
  • Flange condition, wax ring, and shutoff/supply line updates.
  • Haul‑away/disposal and any access constraints. A standard toilet replacement in Franklin typically takes 2–3 hours. Our trucks are stocked to finish most jobs in one visit. Every install includes a 2‑year warranty, or 4 years for Priority Plan members.

Updated: 2025-12-29 00:00:00

Need help in Bellingham, MA? Call (508) 571-6488 or book online.

Can I replace a toilet fill valve myself without professional help?

Yes, many homeowners can replace a standard fill valve if the shut-off works and the toilet is a basic gravity-flush model. For pressure-assisted, dual-flush, or wall-mounted toilets, or if you see corrosion or leaks, use a pro. In Franklin, MA, we handle fill/flush valve swaps same visit, with upfront pricing and multi-flush testing. Professional work includes a 2-year warranty, or 4 years for Priority Plan members.

Quick checks:

  • Shut off water; drain and dry tank.
  • Inspect shut-off and supply line.
  • Fit/adjust new valve per instructions.
  • Restore water and check for leaks.

Updated: 2025-12-29

Need help in Franklin, MA? Call (508) 571-6488 or book online.

We serve the Greater Boston region, including Boston, Worcester, and Providence. See the full service area list below for all the towns we cover.

Service area

Where We Work

150cities
© OpenStreetMap contributors

Need Professional Plumbing & HVAC Service in Boston-Cambridge-Newton?

Restore your home's comfort with dependable Plumbing & HVAC service from our skilled technicians in Boston-Cambridge-Newton and surrounding communities.

Call nowSchedule service